Waveman2disk Configuration File

1. EXAMPLE CONFIGURATION FILE

# Configuration file for waveman2disk:
#
# If you wish to write PC-SUDS files suitable for viewing with  
# sudsplot you will need to run waveman2disk on a Windows 2000 machine AND 
# with all earthworm modules compiled with the /Zp1 flag (accomplished
# by adding /Zp1 to %EW_HOME%\%EW_VERSION%\environment\tools.ini file)
#   (Lucky Vidmar Mon Mar 15 12:04:59 MST 1999)
#
#

LogFile 		1		# 0 means don't create a disc log file. 1=> do.

#
# Debug switch: the token "Debug" (without the quotes) can be stated.
# If it is, lots of weird debug messages will be produced 
#Debug

#
# Data input method:
#  triglist - read the file specified by TrigFile option, and 
#             process the TYPE_TRIGLIST2K messages in there
#
#  interactive - specify one of more SaveSCNL entries in this file
#                 or an external file included with @. Then, the 
#                 user is prompted for start and end time of trace
#                 snippets to be saved
#
#InputMethod triglist
InputMethod interactive

#
# TrigFile - name of the file containing TYPE_TRIGLIST2K msgs
#  required only if InputMethod is triglist.
#
TrigFile /home/lucky/working/src/waveman2disk/trigmsg

#
# SaveSCNL - List SCNLs to save in the interactive mode. The user 
#           will specify start and end time 
#  required only if InputMethod is interactive.
#
#SaveSCNL * EHZ MB *
SaveSCNL LYMT EHZ MB --
SaveSCNL CHMT EHZ MB 10
SaveSCNL LRM EHZ MB 01

#
# OPTIONAL - specify StartTime and Duration for the interactive
#   trace request. If these are not specified, waveman2disk will
#   prompt the user for them.
#   StartTime Format: yyyymmddhhmmss
#

StartTime 19990804140000
Duration  60


# Setup for WaveServers we'll interrogate:
# list of ip addresses and ports of the  WaveServers we're to use
WaveServer aaa.bbb.ccc.ddd 16022

# If a WaveServer doesn't talk to us in this 
# many seconds, we'll abort that request
#
# NOTE: If you are requesting large blocks of time, e.g 
#  in the tank mode, you will want to set this value to 
#  something quite high - longer than the time interval 
#  requested.
#

#TimeoutSeconds 30	
TimeoutSeconds 500

# Sizes of trace memory. Determines how much memory we'll try to grab
# Max number of traces we'll ever see in one event
MaxTraces 100

# largest trace snippet we'll ever have to deal with
# in bytes/1000.
# NOTE: if you intend to produce PC-SUDS files for viewing 
# with sudsplot viewer, you will want to keep this number 
# low (around 1000) because of sudsplot's memory limitations
TraceBufferLen 1000

#
# number of sample periods to declare a gap
#
GapThresh 20

#
# SCNL list of stations to write for each trigger message,  these get
#      written in addition to scn's in the trigger message, or
#      those listed in SaveSCN section
# This is OPTIONAL and only meaningful in triglist mode
#
TrigStation GCMT EHZ MB --
TrigStation BZMT EHZ MB *
#
# Minimum length duration (in integer seconds) for stations in StationFile
#
MinDuration 60
#
# format of data output (sac, ah, suds, seisan, gse, and tank are currently supported)
#

# output base directory for trigger files
#       subdirectory is made in this directory
#
# SUDS
#DataFormat suds
#OutDir "/tmp/SACfiles"
# SAC
#DataFormat sac
#OutDir "/tmp/SACfiles"
# AH
#DataFormat ah
#OutDir "/home/lucky/params/run_trig/AH"
#
# SEISAN
#
#DataFormat                  seisan
#OutDir                     "/home/earthworm/seisan"
#
# GSE
#
#DataFormat                  gse_int
#OutDir                     "/home/earthworm/gse"
#
# Tankplayer 
DataFormat tank
OutDir "/tmp/tanks/"
#
# Specify on what platform the output files will be used:
# intel or sparc - with this information, files will be written out
# in the correct byte order.
OutputFormat sparc